|
https://developer.aliyun.com/article/601617
按照里面的流程用sta配网后,不能正常运行
BEGIN] 2020-11-18 15:35:01
$
Press key 'w' to 2ndboot cli menu in 100ms.
hal_wdg_init fail timeout = 120000
122: ota crc cal:0x7a1a param:0xffff
23: ota upg_flag:0xffffcount:0 crc;0xffff
36: No OTA upgrade.
hal_wdg_finalize fail
NO TXPWR_TAB_TAB found in flash
Load default txpwr for b:0x8296a
Load default txpwr for g:0x82978
Load default txpwr for n20:0x82986
Load default txpwr for n40:0x82994
DPLL Unlock
enter low level!
mac b0:f8:93:10:87:e6
leave low level!
app_init finished
start-----------hal
Welcome to AliOS Things
sta aha[ 5.008]<E>MQTT handler is null
[ 5.008]<W>[und] CMP not ready
[ 10.010]<E>MQTT handler is null
[ 10.010]<W>[und] CMP not ready
sta_Command
ssid:aha key:1
wpa_dInit
wpa_supplicant_req_scan
Setting scan request: 0.100000 sec
MANUAL_SCAN_REQ
# wpa_supplicant_scan
wpa_drv_scan
wpa_send_scan_req
wpa_driver_scan_cb
wpa_get_scan_rst:1
wpa_supplicant_connect
Cancelling scan request
wpa_driver_associate
get txpwrtab gain:9
rate:0, pwr_gain:22
add extral movement in test
---------SM_CONNECT_IND_ok
wpa_driver_assoc_cb
sta_ip_start
pfilter:0x0
Cancelling scan request
[ 15.012]<E>MQTT handler is null
[ 15.012]<W>[und] CMP not ready
[ 20.014]<E>MQTT handler is null
[ 20.014]<W>[und] CMP not ready
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有帐号?立即注册
x
|